Hello, welcome to Biertap.eu!

In today’s video we’re going to show you how you can install and adjust a CO2 metre.

First we’ll attach the metre to the CO2 bottle.

This can be done by turning the large wrench that is on the CO2 metre at the end of the CO2 bottle.

Make sure that the metre is attached good and tight on the bottle to prevent leaking.

Now it is time to secure the bottle to a chair or table.

This is necessary. This way the bottle can’t fall and damage the meter.

Now it’s time to adjust the CO2 pressure. This can be done by opening the main faucet.

The big knob will be turned clockwise.

There’s a wrench on the front of the CO2 metre, this one is for adjusting the pressure.

Clockwise is turning up the pressure.

Counterclockwise is reducing pressure.

It is best to start with a little pressure.

It’s easier to add pressure than reduce it.

When you’re done tapping beers and want to cut the pressure… You only have to turn the main faucet until it’s closed entirely.

Thank you for watching, hopefully you can use our information.

Please contact us if you have any questions.