Information

Dosing Pump by Anierah & Husna

Basic shortcuts

Ctrl + SSave subtitles
Ctrl + click
Double click		Edit highlighted caption
TabEdit next caption
Shift + TabEdit previous caption
EscLeave edit mode
Ctrl + SpacePlay / pause video
Ctrl + HomePlay selected caption
Ctrl + EnterSplit caption at cursor position
at current time

Advanced shortcuts

Ctrl + InsertAdd new caption
Ctrl + DeleteDelete selected caption
Ctrl + IEdit currently played segment
Shift + EnterNew line when editing
Ctrl + LeftPlay from -1s
Ctrl + RightPlay from +1s
Alt + LeftShift caption start time -0.1s
Alt + RightShift caption start time +0.1s
Alt + DownShift caption end time -0.1s
Alt + UpShift caption end time +0.1s

Annotation shortcuts

Ctrl + 1Hesitation
Ctrl + 2Speaker noise
Ctrl + 3Background noise
Ctrl + 4Unknown word
Ctrl + 5Wrong segment
Ctrl + 6Crosstalk segment
You are in the read-only mode. Close
01:30.2
01:36.5
Dosing pump uses a piston or plunger to force liquid from the inlet side to the outside side of the pump body.
01:47.7
01:58.5
As piston moves upwards,it will reduce the pressure in the pump body.
02:06.1
02:25.1
Cause the pressure in the suction line to open the suction valve and permit the liquid to flow into the pump.
02:42.2
02:48.6
Once a dosing pump is primed, this means all the air is pushed out of the lines right up to the injector, it is then set for its required dose rate or set to work from its input signal.
02:58.0
02:59.3
The higher pressure in the discharge line keeps the discharge valve closed.
02:59.4
03:01.6
Once operating, then the pump works at its required flow rate until a stop signal pauses the action or similar.