00:02.7
00:05.4
Tyre Hugger.. Let's Fit one
00:07.1
00:10.3
During Rainy seasons, the stock tail guard
00:10.4
00:12.9
alone can't stop the throw of mud.
00:13.0
00:17.8
From here, mud gets thrown towards the top.
00:17.9
00:22.2
To avoid that, i got a tyre hugger from
00:22.3
00:23.9
Mahindra's official website. (m2all.com)
00:28.4
00:31.8
Now let us open this and see
00:38.6
00:40.5
Here, the Tyre hugger itself
00:40.6
00:45.4
Then... the stands for both sides.
00:46.9
00:49.2
And few, bolts and screws..
00:54.7
00:58.8
This is the stand, which we fill fit at the sides,
00:58.9
01:01.9
And at this end, we connect the tyre hugger
01:02.0
01:06.8
So this is hugger . . and here, 3 screw holes . .
01:06.9
01:10.7
Once we fit it, it'll look like this
01:10.8
01:15.6
These 3 holes should come right
01:15.7
01:17.7
under these, to connect it..
01:17.8
01:21.3
This plug.. needs to be removed..
01:38.4
01:42.5
Other items, we got in the tyre hugger kit.
01:42.6
01:46.5
So how to put this into the hugger needs to be looked at..
01:46.6
01:51.4
So, this particular part.. should be placed on this hole
01:51.5
01:56.3
just like that... so that it fits in..
01:56.4
02:01.2
After fitting this one, we will look at the other 2 sides.
02:01.3
02:06.1
So now i will show you how to place it there..
02:08.6
02:13.6
Like you see, it is designed to go under the existing part
02:13.7
02:18.5
Once we fit it. This shape will be seamless,
02:18.6
02:23.4
when placed beneath after tightening the nut.
02:23.5
02:25.0
Use a star screw driver ...
02:25.1
02:30.6
We'll put this.... and fit it..
02:40.2
02:43.7
We'll have to apply some pressure, since the shape here..
02:43.8
02:48.6
should get along with the rest of the hugger.
02:48.7
02:53.5
So just slightly push it & tighten the screw, so that automatically
02:53.6
02:54.4
it is remains tight.
03:02.4
03:05.1
Tightened.. Ok.
03:05.2
03:10.0
Now, the curve is perfect on this side and looks continuos
03:10.1
03:11.5
Now, we'll fit the remaining one.
03:12.0
03:16.4
This portion should be facing downwards..
03:16.5
03:21.3
Once we place it, it should be facing the tyres.
03:39.8
03:45.9
Like i said, you'll have to apply some pressure to fit & look seamless.
03:46.0
03:50.8
Hold the thumb tight, so that screw go in and remains tightened.
03:57.5
03:59.6
Tighten it 'maximum'
04:00.3
04:04.5
Even after rainy season, one need not remove this.
04:05.5
04:09.4
Max Tightened... both sides.
04:11.7
04:16.4
So that part is over.The 3 screws are now intact.
04:16.5
04:21.3
Now. . this portion here.. we'll
04:21.4
04:26.2
fit this right here near swingarm
04:26.3
04:30.5
and the other end will be connected to the hugger.
04:30.6
04:35.4
So it is for this, we got the bigger Nut and washer.
04:35.5
04:40.3
We'll place it in both the holes and tighten with the washers/bolts.
04:45.4
04:47.0
Fits perfectly.
04:56.5
04:58.0
The second one too . .
05:23.7
05:25.3
This one is tightened..
05:25.4
05:26.7
But these ..
05:26.8
05:30.8
I don't have the right sized 'Allen Key' to tighten it..
05:30.9
05:34.6
So, i will go to a mechanic to tighten it..
05:34.7
05:38.2
So . . we'll see after that..
05:38.3
05:43.1
Like you see now, it has been fitted well. Both sides
05:43.7
05:48.6
The screws at the top, also the 2 nuts here down.
05:49.2
05:53.8
Not bad, & It has not really taken away the looks..
05:53.9
05:55.5
Not Bad . .
05:55.9
05:58.2
(Sorry for the 'low voice' in this portion)
